Does anyone have any use for these 8.4" touchscreen LCDS??

[brmorr]

Picked up a ton of these brand new in the box NL8060BC21-11F Data Modul 8.4-inch LCD Screens

Would anyone have any use for these? Maybe at work or in the arcade portion of things? All are new and appear to have touchscreens attached but I am sure they can be used without.

Let me know if anyone knows what these go to or have a use for them. They are over $400+ brand new each, but I will sell them for a fraction of that cost!!

Thanks!!

 

[bobbyb13]

What is the signal in connector type?
Could be useful as secondary screen for working on Pi and/or crtemudriver builds.

 

[brmorr]

What is the signal in connector type?
Could be useful as secondary screen for working on Pi and/or crtemudriver builds.

Here is a page with some specs and how to connect, etc... This is just the monitor itself, not the touchscreen attached.

NL8060BC21-11F

NEC NL8060BC21-11F, one of the most popular LCD screens in control industrial and medical applications. This 8.4 inch NEC NL8060BC21-11F is originally equipped with its manufacturer's LED backlight strip with built-in LED driver, which has typically 800 nits (based on its datasheet). By...

www.lcdpart.com

 

[brmorr]

If anyone finds a need for these, I would love to hear it. Then maybe more people might need these. I have over a 100 of them.

 

[bobbyb13]

Have you opened one of them up and had a close look at it? I looked through that website link and watched that video but couldn't gain any useful info from either.
Do you have an idea how much you're going to want for one of these?

 

[cadillacman]

Might be cool for a table top mini cabinet build or something

 

[brmorr]

Have you opened one of them up and had a close look at it? I looked through that website link and watched that video but couldn't gain any useful info from either.
Do you have an idea how much you're going to want for one of these?

Shoot me a PM. I am thinking around the $40 range for these, less if you take more.

Also, just search on that NL8060BC21-11F. There are also sites with info. Obviously, these come from China.

 

[gwarble]

I'll check if they can be used on any of our CNC machines to either replace LCDs (go bad because they are on all the time) or to retrofit CRT based machines

 

[brmorr]

I'll check if they can be used on any of our CNC machines to either replace LCDs (go bad because they are on all the time) or to retrofit CRT based machines

Just let me know!! They are boxed in 5's, but I will sell 1 off to people as needed. Just want to move this on to people who can use them!!!

 

[brmorr]

Might be cool for a table top mini cabinet build or something

Wow, a @cadillacman sighting. Hope everything is good with you!!!

 

[McHale]

I'm doing some digging on these now. If I can make a bartop with it without too much hassle I'll be in for a bunch.

 

[bobbyb13]

Looks like you can upgrade a few parts and make them medical imaging grade level resolution?

 

[journeymandt]

I'm doing some digging on these now. If I can make a bartop with it without too much hassle I'll be in for a bunch.

maybe something like this?

Gurgle AI suggests it's possible to interface 15Khz RGB to an LVDS interface with "special consideration to the refresh frequency"

Hopefully someone smarter than I can chime in...

D

 

[cadillacman]

Wow, a @cadillacman sighting. Hope everything is good with you!!!

Things are on the upswing, other than finally looking for a house and realizing that wont happen until the next housing crash im glad to see youre still deep into the game stuff. Hopefully one day ill be your arcade scrapper once again!

 

[jlweatherly]

Something like this is what I have in mind.

New spin on HA switch plate interface

Was inspired by the HASP project, but wanted to create a more self-contained HA user interface in switchplate. Also, in keeping with my switchplates in my house, was looking for a screwless design. So, I’ve created a switchplate with integrated raspberry pi zero w and a 640x480 IPS capacitive...

community.home-assistant.io

 

[DPtwiz]

i always wanted to build a touch screen juke box for Mp3's.. most people use Elo touch screens from what i've seen.

 

[brmorr]

No fellow arcade collectors have figured out a useful way to use these monitors yet??

Let's make a deal!!!

 

[KaBoom1701]

Interesting.

I think the simplest solution would be to get a LVDS to VGA converter then pin off the VGA for the RBG inputs.

 

[brmorr]

If anyone needs any more pictures of connections on this, I can pull one apart a little more tomorrow. Just let me know what you need!!

 

[brmorr]

Ok, let's try this. Anyone want to mess with these for this pricing??

$30 shipped for one
$110 shipped for a box of 5.

Friends and Family paid via Paypal.

Let me know. Let's fly these out of my garage!!!