Do yow know much t-molding a 720 takes....

KillerKades

Well-known member

Donor 2011
Joined
Feb 21, 2008
Messages
1,803
Reaction score
323
Location
West Bend, Wisconsin
You know much t-molding a 720 takes....

A helluvalot.....

The standard 20ft is not nearly enough. Now I will have to wait until Monday until more arrives to finish the resto. :banghead: Was almost ready for the reveal, but now it has to wait until next week.

Here is a teaser of the new tabletop version. :D:D:D

DSC03421.jpg
 
Last edited:
Sorta like my cyberball cab. Don't remember exactly, but it's somewhere in the 30's IIRC. Mix of black and chrome.
 
Will 40 ft do it?

40 will be plenty (for the black). You only need about 6ft of the chrome. That I have extra -- except the slot for the chrome is 1/8" and the molding is way loose. I used the duct tape over the "T" of the molding to build it up so it fits perfecto. That is after I wasted a couple feet trying a glue method that I just done effed up.
 
40 will be plenty (for the black). You only need about 6ft of the chrome. That I have extra -- except the slot for the chrome is 1/8" and the molding is way loose. I used the duct tape over the "T" of the molding to build it up so it fits perfecto. That is after I wasted a couple feet trying a glue method that I just done effed up.

I had to glue in part of the molding on my pac cocktail where my router effed up on me. That super glue just would not hold. I wish I had though of this duct tape trick. I'll try it on a corner of my Narc that won't stay down.
 
Back
Top Bottom