MmSadda
Well-known member
I can ship within the US, or arrange local pick up in Columbus, OH. I accept PayPal Friends and Family, Venmo Gift, or check if shipping, or cash on pick up. Prices don't include shipping. Please see picture for details of condition
DMD Displays $90 each - fully working, no lines out or burn.
Bally 6803 MPU SOLD
Pulled out of an Atlantis. Boots and works as it should except for a few lamps out.
Stern MPU-200 $60
Needs repair, but relatively clean. Worked beautifully until the battery was removed, and then didn't want to boot past the 3rd chime or so.
Stern MPU-100 $50
Needs repair, but relatively clean. Was flaky and then not working; likely needs new chip sockets at least
I've also got a handful of other non-working Bally/Stern MPUs that have some corrosion but may be good for chip pulls if there's any interest in the lot.
DMD Displays $90 each - fully working, no lines out or burn.
Bally 6803 MPU SOLD
Pulled out of an Atlantis. Boots and works as it should except for a few lamps out.
Stern MPU-200 $60
Needs repair, but relatively clean. Worked beautifully until the battery was removed, and then didn't want to boot past the 3rd chime or so.
Stern MPU-100 $50
Needs repair, but relatively clean. Was flaky and then not working; likely needs new chip sockets at least
I've also got a handful of other non-working Bally/Stern MPUs that have some corrosion but may be good for chip pulls if there's any interest in the lot.
Attachments
Last edited: