DKjr & DK3 video problems

jbk

Active member

Donor 4 years: 2011, 2013-2015
Joined
Mar 6, 2010
Messages
1,568
Reaction score
20
Location
rivesville, West Virginia
I have multiple DKjr boards all seem to have broken/problems with the 50K horz position pot. I replace both the H and V 50k pots on the board and still eveytime I try and adjust the H position pot the video scrambles and no amount of adjustment will correct it. If the board sets for several minutes it will usually be ok and the video is fine until you try and adjust the H pot. What am I missing? What else controls the H position on these boards. The monitor is fine it works with other DK/DKjr/DK3 boards without issue.
 
After posting this question I went back and searched the forum and found that I had a h-hold pot that was the issue. I turned it from post to post several times and it must haved cleaned it enough that it is working fine now. Sorry to take up forum space before checking the archives.
 
After posting this question I went back and searched the forum and found that I had a h-hold pot that was the issue. I turned it from post to post several times and it must haved cleaned it enough that it is working fine now. Sorry to take up forum space before checking the archives.

Don't feel too bad about posting a fix. It got fixed and posted, not bad in my book. ☺
 
Back
Top Bottom