DK3 in a MB WB? will it work?

PrairieDillo

Well-known member

Donor 2011, 2024
Joined
Aug 3, 2009
Messages
5,152
Reaction score
534
question on Nintendo cab compatibility.

I just got a DK3 board in a lot sale.
Can I test that in my MBWB cab by just plugging it in?
Yes I know that the monitor will be the wrong way...
 
question on Nintendo cab compatibility.

I just got a DK3 board in a lot sale.
Can I test that in my MBWB cab by just plugging it in?
Yes I know that the monitor will be the wrong way...

It should be fine, the edge connector pinouts are the same and I use the same harness to test either. You just won't be able to test all the joystick directions. - Barry
 
thanks, I'll give it a check.

Since Dokert was making harnesses for all mentioned boards in a combo harness I figured it would work.
 
Should be fine. I used to have a Nintendo to JAMMA adaptor made by Clay Cowgil. It worked with both Mario Bros and DK3. I don't see why there would be a problem.
 
thanks, I'll give it a check.

Since Dokert was making harnesses for all mentioned boards in a combo harness I figured it would work.

I build them and the harness has jumpers to work both games. but the original harness won't do the joystick in all directions as the player 2 is on the other side of the edge connector. - Barry
 
Back
Top Bottom