DK3, can I test it in my DK cab?

tron guy

Super Moderator
Staff member

Donor 12 years: 2011, 2015-2025
Joined
Jun 26, 2007
Messages
23,144
Reaction score
2,592
Location
Eureka, California
I have an untested board and want to see if it works.


Can I plug it into my DK cab?
 
It should work. I a have had a DK Jr board in a DK3 before. The DK3s are all conversions from one of the earlier ones. To be safe, you might want to download a DK3 conversion manual to see if any changes were made to the wiring during the conversion.
 
Donkey Kong 3 only has the 22/44 pin edge connnector.......none of the tiny .100 clusterfuck of connectors. If your Donkey Kong harness uses/has the edge connector, you're good!

Edward
 
Donkey Kong 3 only has the 22/44 pin edge connnector.......none of the tiny .100 clusterfuck of connectors. If your Donkey Kong harness uses/has the edge connector, you're good!

Edward


it does, thanks
 
Back
Top Bottom