Dk remix baord

DaveFromBuffalo

Well-known member
Joined
Oct 20, 2013
Messages
1,273
Reaction score
271
Location
Tonawanda, New York
Hey Gents, I have a 2 board DK PCB. I have had a remix board since 2016. Today I tried to install it and of course my Dk isn't working now. The directions for install only referred to the 4 board stack. Could this be the problem. Any help would be appreciated. This is so frustrating. I have attached. A picture of my current screen.
 

Attachments

  • IMG_7091.jpeg
    IMG_7091.jpeg
    553.5 KB · Views: 4
No it's the sharp it's just my directions only refer to the 4-board stack I was just wondering maybe because mine is 2 board there is an issue
 
Is this just the Re-mix or the Ultimate with Re-mix.
The Re-mix requires just adding the kit. The Ultimate requires much more.
 
Ok I have removed the remix and my dk is working again
 

Attachments

  • IMG_7093.jpeg
    IMG_7093.jpeg
    701.9 KB · Views: 7
  • IMG_7094.jpeg
    IMG_7094.jpeg
    613.7 KB · Views: 7
  • IMG_7095.jpeg
    IMG_7095.jpeg
    500.3 KB · Views: 7
I have since moved on from that kit but I did nothing but install it in the Z80 spot when I used it and had no issues on my 2 board stack.
 
Update…tonight I put back the kit and it works. Kit or chip or both must not have been seated all the way. Thanks everyone for
Chiming in.
 

Attachments

  • IMG_7107.jpeg
    IMG_7107.jpeg
    493.1 KB · Views: 3
  • IMG_7106.jpeg
    IMG_7106.jpeg
    481.5 KB · Views: 3
Back
Top Bottom