DK pcb vertical video flip?

88mph

Well-known member
Joined
Oct 9, 2008
Messages
1,686
Reaction score
58
Location
Sutton, Massachusetts
I've read in some old threads that it is possible to vertically flip the image output from a DK pcb set by either removing or adding a jumper to the pcb. I have a 2 board set, and can't seem to find where this jumper lives.. I checked the manual with no luck. Can someone point me in the right direction? I could always flip the wires on my yoke but figured this would be easier.

Thanks!
 
Back
Top Bottom