BAP2112

New member
Joined
Aug 21, 2011
Messages
16
Reaction score
0
Location
Carmichael, California
Hello all,

I have a DK 4-board set with the DK2 kit installed. I have had it over a year an no problems at all. A few weeks ago I got a DK JR PCB and hooked it up to my DK machine to test and play for a few days. Well when I hooked my DK backup sometimes when in attract mode some of leading zeros or ending zeros on the high scores will be missing and may or may not appear to the far right. Any ideas?

Picture attached.

Thanks
 

Attachments

  • DK Missing Number.jpg
    DK Missing Number.jpg
    76.1 KB · Views: 33
Your problem lies in your dk2 kit. Try reseating it into the sockets and press down on the eproms to reseat them.
 
Hello all,

I have a DK 4-board set with the DK2 kit installed. I have had it over a year an no problems at all. A few weeks ago I got a DK JR PCB and hooked it up to my DK machine to test and play for a few days. Well when I hooked my DK backup sometimes when in attract mode some of leading zeros or ending zeros on the high scores will be missing and may or may not appear to the far right. Any ideas?

Picture attached.

Thanks

I can't be sure but I think if you re set the high score table that will fix it.
 
Reseat

So actually take the DK2 daugther board out and put it back in?

I pressed down on it and all of the chips. Everything was in there really tight.

The problem still exists.

Thanks
 
Back
Top Bottom