DK Jr +12v

jphillip5

Active member
Joined
Dec 5, 2007
Messages
1,120
Reaction score
12
Location
Iowa
DK Jr +12v *Resolved*

I picked up an empty Donkey Kong cabinet a while back that I intend to turn into a DK Jr cabinet (already have DK). I already had a JR boardset and had a spare K7000 monitor that I mounted into the machine.

I picked up one of Dokkert's repro wiring harness (nice work by the way) and an inverter board from Mike's arcade. The inverter board requres 12vdc to operate. I can't seem to find a spot to pull the 12 volts other than hacking into the brand new wiring harness, which I'd rather not do. Am I missing something obvious?

Thanks in advance....(damn, wrong section!)
 
Last edited:
Problem solved! Custom cable for the 7pin connector to get GND and +12volts for the inverter sent N/C. Thanks for purchasing the Dokert/Flagg DK harness!!!!!!! - Barry
 

Attachments

  • IMG_1262.jpg
    IMG_1262.jpg
    93.6 KB · Views: 20
  • IMG_1260.jpg
    IMG_1260.jpg
    70.3 KB · Views: 18
  • IMG_1261.jpg
    IMG_1261.jpg
    79 KB · Views: 15
Back
Top Bottom