DK cocktail help.

Cpen5311

Member
Joined
Nov 22, 2009
Messages
320
Reaction score
1
Location
Studio City, California
Where would i find a cap kit for the monitor and sound amp for the cocktail version of Donkey Kong?

There is no sound coming from the game at all. I've obvoiusly tried the volume knob and checked the speaker. The wires look fine as well.

Thanks!

p.s. i've searched bob roberts but his site is a little confusing, plus i don't know what monitor it is or where the hell the sound amp is. :)
 
Its either a sharp or a sanyo.
Assuming it has the original monitor.
The sound amp is inside the metal chassis and you'll see a small transformer on the sound board.
I believe the cap kits for the Sanyos are the same as the EZ20s but I'm not sure about the sharps.
I'd email Bob Roberts if I was you to make sure.
Good luck.

ERIC
 
my DK cocktail has a sanyo in it. a mini ez20. easiest way to look is to take out the 4 screws that hold the monitor in, unplug the power cord, and look at the chassis. here's the pic from bob's site. you should have two (or possibly 3, can't remember) little boards next to the main chassis pcb. one of those is the amp board.

mon6.jpg
 
Back
Top Bottom