DK 4 Layer no sound

virtvic

Member
Joined
Feb 25, 2007
Messages
68
Reaction score
0
Location
Glasgow
I have just received a Donkey Kong 4 layer pcb and am using it in my upright Dk Jr cab.

The game works fine, but I have no sound at all. I know the sound amp works because when I play Jr, it is fine.

I have a hunch that the DK 4 layer pcb may need some external power to the sound board from the psu (marke p7 sou) Is this correct?

The 4 layer pcb has rainbow cables where they should be connecting the boards together, but nothing in the 7 pin plug next to the sound connector on the sound board, which leads me to think that this goes to the unused 7 pin connector on my psu.

If so, where could I get a cable from?
 
I have just received a Donkey Kong 4 layer pcb and am using it in my upright Dk Jr cab.

The game works fine, but I have no sound at all. I know the sound amp works because when I play Jr, it is fine.

I have a hunch that the DK 4 layer pcb may need some external power to the sound board from the psu (marke p7 sou) Is this correct?

The 4 layer pcb has rainbow cables where they should be connecting the boards together, but nothing in the 7 pin plug next to the sound connector on the sound board, which leads me to think that this goes to the unused 7 pin connector on my psu.

If so, where could I get a cable from?

Correct, you need a seperate power cable for the sound board! I would post something int the want to buy section.
 
Back
Top Bottom