Direct TV tube and yoke swap for a Wells Gardner 4600

wolfeel

Well-known member
Joined
Jun 17, 2007
Messages
2,850
Reaction score
132
Location
fortuna, California
Direct TV tube and yoke swap for a Wells Gardner 4600

Make: Zenith
Model: Sentry 2
Model # SLS1937S
Tube # A48ACB02X
OHMS: (R&B 2.5), (W&Y 8.9)

This should be a direct tube and yoke swap for a Wells Gardner 4600.

I will post a pic of the TV set soon.
Sent a PM to orion3311 to add to his list (looks like he had the tube # but not a model).
 
Last edited:
Here is a series of pictures of the TV and the tube I used.
 

Attachments

  • 01.JPG
    01.JPG
    47 KB · Views: 42
  • 02.JPG
    02.JPG
    46 KB · Views: 27
  • 03.JPG
    03.JPG
    78.2 KB · Views: 33
  • 04.JPG
    04.JPG
    37.4 KB · Views: 35
  • 05.JPG
    05.JPG
    63 KB · Views: 28
Last edited:
The tube ready to go and the aftermath of the TV.
 

Attachments

  • 06.JPG
    06.JPG
    64.9 KB · Views: 37
  • 07.JPG
    07.JPG
    49.1 KB · Views: 29
The first picture is the 4600 frame and untested (complete) chassis.
The second picture is a crappy picture of it working. It looks so great with no burn. Need to do a cap kit and some adjustments after and BAM! a new monitor.
 

Attachments

  • 08.JPG
    08.JPG
    55.2 KB · Views: 30
  • 09.JPG
    09.JPG
    40.2 KB · Views: 52
Nice, there have been a couple of zenith tvs on here now that have that same tube# that are drag and drop for the 4600. now all we need is a 4600 flyback replacement..I have my local tv shop searching for tubes for me now. if he see's a 19" tv that he's gonna junk he's gonna pull it apart first check to see if its a cr23 and if it is he'll set it a side and call me to come get it. A lot less work for me.
 
Back
Top Bottom