Diode recommendations CPS2/CPS1 combined kick harness?

Tighe

Well-known member
Joined
May 25, 2009
Messages
20,797
Reaction score
825
Location
Richmondville, New York
Diode recommendations CPS2/CPS1 combined kick harness?

I have CPS1 and CPS2 boards in a one of my cabs, and I want to leave the kick harness plugged in and just swap the jamma harness when I want to switch games. I thought about using diodes to keep and possibility of current from the powered board going to the non-powered board via the combined kick harness. Anyone done this? Can you recommended a good diode for this? Radio Shack part number if possible?
 
I don't believe you will need diodes if you are not using a jamma switcher. There wouldn't be another board powered to interfere.
 
I don't believe you will need diodes if you are not using a jamma switcher. There wouldn't be another board powered to interfere.

You need diodes powered or not. My JAMMA switcher only powers one board at a time and I still had button feedback.

Zenomorp is the guy to talk to on this, or check out his youtube vids, great info, awesome guy, nice as could be, great work!
 
You need diodes powered or not. My JAMMA switcher only powers one board at a time and I still had button feedback.

Zenomorp is the guy to talk to on this, or check out his youtube vids, great info, awesome guy, nice as could be, great work!

Thanks! 10 CHARACTERS.
 
Back
Top Bottom