dimensions of robotron/joust bezel & marquee?

Malice95

Well-known member

Donor 2011
Joined
Aug 29, 2010
Messages
3,692
Reaction score
31
Location
Howell, New Jersey
So I am going to place an order for a decent number of the multiwilliams bezels and marquees. I'd like to confirm the dimensions that were written on the artwork before I commit to the order,

Can someone measure their bezel and marquee and PM me the dimensions?

Thanks,
Mike
 
I came up with the following on my MAME cab (which was originally a Robotron cab, and has the original bezel and a marquee I purchased for it)
marquee: 24 3/8" x 7 1/2"
bezel: 24 3/8" x 22"
Is that about what you have?
 
I came up with the following on my MAME cab (which was originally a Robotron cab, and has the original bezel and a marquee I purchased for it)
marquee: 24 3/8" x 7 1/2"
bezel: 24 3/8" x 22"
Is that about what you have?

I have the marquee as 24 3/8 x 7.5
and The bezel as 22 1/16 x 24 7/16

Can you double check the bezel measurements?

Thanks,
Mike
 
Just double checked it, the bezel and marquee are the same exact width (which makes sense, since they both fit between the sides :) ) The height of the bezel isn't as critical, but I still got 22". Any extra will be hidden behind the control panel and marquee area. It slides in from the top, then sits in a groove behind the control panel. There's at least 2 inches behind the CP and an inch behind the marquee area that's not seen, and there's nothing above it (so you can slide it in and out) Hopefully at least one more person will chime in too.
 
Last edited:
I have the marquee as 24 3/8 x 7.5
and The bezel as 22 1/16 x 24 7/16

Can you double check the bezel measurements?

Thanks,
Mike

My Phoenix Style MW bezel is the same as your measurement Mike


Just double checked it, the bezel and marquee are the same exact width (which makes sense, since they both fit between the sides :) ) The height of the bezel isn't as critical, but I still got 22". Any extra will be hidden behind the control panel and marquee area. It slides in from the top, then sits in a groove behind the control panel. There's at least 2 inches behind the CP and an inch behind the marquee area that's not seen, and there's nothing above it (so you can slide it in and out) Hopefully at least one more person will chime in too.
I agree as long at you dont make the height 40" the height isnt that critical to be exact.
 
FWIW, here's what I measured for my Joust:

Bezel: 24-3/8 x 22
Marquee:24-1/4 x 7-1/2
 
Do you have multiple projects or are you going to sell them to KLOV members?
 
If you do Phoenix Arcade MW glass bezels, they will SELL and I want one.:) GLASSSSSSS not plexi
 
Complete Bezels and Marquees are shipping to me next week.. Website is built to sell it. Almost ready to rock and roll....

coming soon...
 
Coming soon... Last I heard, the silk screener says they are shipping early this week. I just ping'd them for an update. Believe me.. I want to start selling these to:)
 
Back
Top Bottom