Did I kill this chassis?

Hi Security0001
So I'm putting in an order for these parts. Is there anything else that you think I may need to get the B+ voltage back to normal?
So far here is what I've replaced:
Full caps (I did them today even though the previous owner had already done them)
Fly back
B+ filter
1.25 amp pigtail
3amp pigtail
2SC1106 VR
2SD870 Horizontal Output Transistor

I've also tested the following and they have all passed:
R908
R912
FR401 (Although it passed Im going to replace because the legs are brittle)

I'm buying X901, X902 and FR 901 along with other new pots and other resistors.
Any other suggestions?
 
This is what I have at the moment. B+ between 98v and 100v
10549f0a1a01659d52065251409e08a0.jpg
 
I would replace R908 anyway , and hopefully FR901 is the fix. Have you pulled and tested Fr901 yet?
 
Hi Security0001
So I'm putting in an order for these parts. Is there anything else that you think I may need to get the B+ voltage back to normal?
So far here is what I've replaced:
Full caps (I did them today even though the previous owner had already done them)
Fly back
B+ filter
1.25 amp pigtail
3amp pigtail
2SC1106 VR
2SD870 Horizontal Output Transistor

I've also tested the following and they have all passed:
R908
R912
FR401 (Although it passed Im going to replace because the legs are brittle)

I'm buying X901, X902 and FR 901 along with other new pots and other resistors.
Any other suggestions?


yup if your getting the pots that looks like the obvious stuff. make sure your order is in wednesday because i am gone to Grinkfest 5 and i am not shipping thursday thru sunday this week.
 
Back
Top Bottom