Dick Millikan-Board Repair Guru

MCA

Member
Joined
Sep 20, 2008
Messages
152
Reaction score
3
Location
New Britain, Pennsylvania
Rating - 100%
1   0   0
I contacted Dick after reading many posts and PM'ing fellow KLOV'ers regarding his prowess at board repair. He has great rates and my boards were done and shipped back to me in ONE WEEK!
I tested both boards (DK JR and DK) last night and all is well. Thanks to Dick it will be a DK Christmas in my house.
I highly recommend him to anyone needing board work done.

Morgan
 
I contacted Dick after reading many posts and PM'ing fellow KLOV'ers regarding his prowess at board repair. He has great rates and my boards were done and shipped back to me in ONE WEEK!
I tested both boards (DK JR and DK) last night and all is well. Thanks to Dick it will be a DK Christmas in my house.
I highly recommend him to anyone needing board work done.

Morgan

Good info. How do you go about contacting him?
 
Give me a break. I did Google his name...

Did not realize he was a member here. I don't need to search with outstanding Klovers such as yourself.

I did give you a break :D I included the Info
If I wanted to be dick about it, I would have just posted the first line.
Guess your search function is broken:D
The search function is not the greatest on this site, so it was a attempt at some humor, nothing personal, so if it pissed you off, that was not my intent, sorry


Merry Christmas
 
Dick Millikan

Dick lives about a half an hour away from me and I took a non-working Star Wars board to his house at 6PM on a Friday and he had it repaired the same night. His rates are VERY reasonable as well. Highly recommended for board repair!!
 
I did give you a break :D I included the Info
If I wanted to be dick about it, I would have just posted the first line.

The search function is not the greatest on this site, so it was a attempt at some humor, nothing personal, so if it pissed you off, that was not my intent, sorry


Merry Christmas

I gathered the humor and your info was appreciated. I am not pissed or upset. I actually complemented you. I guess without the little emoticons it is hard to understand the mood of someones response.

Don't be a dick remember we are talking about Dick.
 
He has repaired a couple of boards for me, and sold me a board that I looked forever to find.
great swordsman. At a solid price too.

can't say enough good things about this guy. great to have him on this forum.
 
Seeing this thread reminded me I needed to get something done with my Pole Position pcb. I finally sent it out today for Dick to repair. Now I can focus on getting the last bit of the wiring harness hooked up in my Pole Position cockpit cab. :)
 
Received my Pole Position boards back from Dick this past week. Imagine my shock when I still had the same ram 8 error I had before. I contacted Dick and he gave me a few things to do, including a manual reset of the board by grounding the rest tab. Sure enough that was the problem and now the board is working. The turnaround time was faster than I had expected too. Dick Millikan is the man to go to if you need a Pole Position pcb repaired. Very reasonable rates, especially if you look on eBay and see what people want for their repair service. :) Thanks again, Dick. Another Pole Position lives!
 
I've been trying to contact Dick. PM'd and sent email. I have a DK 2-board set I need repaired. How long did it take him to get back to you when you first contacted him?
 
I've known Dick since I bought my first Star Wars in 2000 and he brought it back to life. Dick is GOOD PEOPLE...you just need to be patient with him sometimes, he'll get back to you. I'll leave a msg. and know I'll hear from him in a couple of days. I've been to his place and it's literally WALL TO WALL pcb's up to the ceiling, he's a busy guy. Dick is a definite asset to the arcade community!
 
I've known Dick since I bought my first Star Wars in 2000 and he brought it back to life. Dick is GOOD PEOPLE...you just need to be patient with him sometimes, he'll get back to you. I'll leave a msg. and know I'll hear from him in a couple of days. I've been to his place and it's literally WALL TO WALL pcb's up to the ceiling, he's a busy guy. Dick is a definite asset to the arcade community!

+1 He does excellent work
 
Back
Top Bottom