Working on a diamond lady for a friend..i got it to my house and did some generic troubleshooting.
F11 fuse was blown.(out hole)...i replaced it (1amp 250v sb)
A few edge connectors were not connected and one is connected but loose (A1-J1 connector)
Someone cut the test switch wires off so no way to do a diagnostics test.
Looks like a molex connector is missing its connection...is this what the service switch connected to maybe?
Some leakage going on around the crystal.
The led on sound board is blinking...that cant be good.
Needs new rubbers and drop target decals.
I only get lights and theme song sound thus far and nothing else...no flipper action..no start up sounds..just lights and music....i never worked on a gottlieb before.
As if dont have enough projects going on.
F11 fuse was blown.(out hole)...i replaced it (1amp 250v sb)
A few edge connectors were not connected and one is connected but loose (A1-J1 connector)
Someone cut the test switch wires off so no way to do a diagnostics test.
Looks like a molex connector is missing its connection...is this what the service switch connected to maybe?
Some leakage going on around the crystal.
The led on sound board is blinking...that cant be good.
Needs new rubbers and drop target decals.
I only get lights and theme song sound thus far and nothing else...no flipper action..no start up sounds..just lights and music....i never worked on a gottlieb before.
As if dont have enough projects going on.
Attachments
Last edited:
