Dedicated Ladybug weirdness for posterity

treborlicec

Well-known member

Donor 2016
Joined
Nov 4, 2005
Messages
6,167
Reaction score
182
Location
Indiana
I've spent my vacation last week getting my grody Ladybug spiffy and such. Had a couple issues. P1 start wouldn't register. Checked the switch, it was good. Ohmed the wiring back to the board and it was good. Put in my Mr. Do! board and P1 worked find. Figured PCB issue on the Ladybug. Separate issue, coindoor lights were out. Checked the 3 fuses in the power block area. One of them was bad, a 1A fast blow. Replaced that and the coindoor lights came to life. To my surprise, P1 start on Ladybug was working after the new fuse was replaced. Weird that a fuse would cause that issue.
 
Back
Top Bottom