FS Parts: Decent JAMMA extenders

Adrianlamande

Member
Joined
Apr 21, 2024
Messages
72
Reaction score
44
Rating - 0%
0   0   0
Hey guys I have a few of these left from a thread over at Arcade Projects. I ordered 50 sets of @Frank_fjs pcbs to make some up for my cabinets. 50 was excessive but almost the same cost as 20. The shorter one I only have 1 left and the longer one I have a few of. If anyone is interested. They come with a voltmeter, 3d printed JAMMA Key and Edge cover (the edge cover is not installed in the photos). Edge cover is mainly to keep the edge from getting damaged during shipping but it comes in handy for spare unused boards too. 18awg for power, video and sound, with multiple wires for gnd, 5v and 12v, every pin is filled with the controls running along the IDC.

$45 USD for the shorter one + postage from Australia to where ever you are
$55 USD for the longer ones + postage from Australia to where ever you are

Trying to get these out of here before I head to Japan in a few weeks. I do a wide range of decent quality custom cables, kick harnesses etc and if you can't find it or a sick of crappy quality cables I can probably make it.
 

Attachments

  • 20240729_094730.jpg
    20240729_094730.jpg
    955.3 KB · Views: 38
  • 20240729_094713.jpg
    20240729_094713.jpg
    982.6 KB · Views: 38
Back
Top Bottom