Death Row Pardons...

Thomas

Well-known member

Donor 2021
Joined
Jan 23, 2009
Messages
3,726
Reaction score
75
Location
Virginia
Man it is a lot of work just prepping for tube swaps! In fact this whole hobby is a lot of work. Last night I spent hours popping the pins out of used molex's to recycle back into games I am working on.

Anyway I just finished going through the few tv's that I have. You know making sure they have the correct cr connector and what not. I had to weed out 2 more tv's because of cr24 connectors err... So now I have confirmed 8 that are good candidates for swaps after a lot of damn work!

All that's left now is to buy another rejuvenator cause I got broke and sold my first. I want to make sure I clean and balance the tubes before finial swap. Now i just need some extra money!

Here are a few snaps of my tv catalog system!

http://arcadeparts.org/Monitors/
 
Can any of these CR23 and CR31 neck boards be used for making adapters?
 

Attachments

  • DSCN4832.jpg
    DSCN4832.jpg
    98.2 KB · Views: 16
  • DSCN4833.jpg
    DSCN4833.jpg
    97.1 KB · Views: 16
Yes, virtually every one can be used, and the CR24's you mentioned above are useful as well. If you are interested in selling or trading something for these please send me a PM.
 
I am going to ship all these to you with the scope. You want the cr24 too?

Take a look at the last three pictures see if you think that chassis might help our deal a little?

I sure would like a cr23 and 31 adapter for a bk shipped back with the other stuff we spoke of!
 
Hey Richard, I added two snaps of the neck boards with 1 CR24, One of those on the table says Sony on it, from a Trinitron. IDk if you can use a trinitron or not but it will be in there. Lastly on this, I can't find the other CR24 it must have met its maker.

I added some pictures of your new scope working. I think the last three shots of the Tek 2335 have today's date and time.

I am having a hell of a time finding the darn pdf manual burnt on a cd. But I have not given up yet!

Now back on track...

Where the heck can I get some of those tape magnets that go under the yoke windings?

Thanks!
 
Everything looks good to me. Someone here ordered a large number of the magnets and resold them in smaller lots. I still have quite a few and can throw those it with everything else. The CR23 and CR31 will not be a problem as long as you send me those neckboards, otehrwise I may not have the parts to make one.
 
They will be on the way Tuesday or Wednesday. Very cool on the magnets!
 
Back
Top Bottom