Dead G07 question

chas010

Permanently Banned
Joined
Aug 23, 2008
Messages
1,341
Reaction score
2
Location
Waterloo, New York
Hey guys I picked up a pac man with a non working go7 in it and had a couple questions on how to ggo about repairing it. It had neck glow but no pic, both fuses are good on th chassis. The only thing I saw at first glance is that the neck board had been cracked in half at some point and then quickly repaired (poorly). After taking it apart I also noticed no degaussing equipment on the monitor anywhere, can this monitor have been run like this?
Thanks Jason
 
Check the broken neckboard, check the B+, check for cold solder joints.

Technically a G07 will run with only 120ac applied, but other things need to be connected to keep from being shocked (anode cup) and picture (yoke wires, video input)....
 
Back
Top Bottom