Daytona USA Controls Question

Arcade1VA

Well-known member
Joined
Apr 20, 2008
Messages
1,788
Reaction score
164
Location
Illinois
I picked up a Daytona USA sitdown cab. The steering and shifter controls belong to a Daytona USA 2 machine. Is there a way to make the control panel work with a Daytona USA game. The control hookups seem to be a bit different between the two, and the schems on the Sega website are marginal at best. Has anyone attempted this or knows if it can be done? Please PM or post as I would like to see if this will work or not. Thanks.
 
Two completely different FF setups. However, if you can live without the force feedback, you should be able to splice the wires and make it functional as they use the same 5k steering pot.

As Burt6666666666666666666666666 said, it would probably be best to pick up a Daytona panel.
 
I actually could care less about the FF function, even though most would disagree, as it adds to the game experience. Point is, is that I already have this one, and shipping these is always expensive to boot, plus I would have to try to sell this one. I was able to match and mate one of the molex plugs to the original Daytona harness. I will have to look to see if it is the one that has the steering pot and button functions on it, but it does look as tho it is for the basic control functions.
 
Back
Top Bottom