Dave @ Ram Controls and DPTwiz present...

DPtwiz

Well-known member
Joined
Nov 2, 2006
Messages
8,099
Reaction score
621
Our first joint venture in making a reproduction cabinet. Big thanks to Dave, this project would not have been possible with his full cooperation, and letting me pickup on where he left off on this project. He was instrumental in making this Joint venture happen, and here's prototype #1. We are working together on a few other reproduction items, in hopefully a long list of many things we hope to bring to the arcade collecting community.

Final design is not set yet, factory parts have to be test fit to the cabinet to see if everything is in spec. It takes a LOT of wood to make this one! Cabinets will come in bare wood, and hopefully include the following: 3/4 T molding, 1.5 correct top T molding, and Casters. Enjoy the pics!!!

brett027.jpg


brett026.jpg


brett025.jpg


brett033.jpg


brett030.jpg
 
ehehe V6 pimped out with Cobra R body kit, badges, wheels, and dual side exhaust!
 
Forgive the ignorance (as I am no SW fan, and never looked for it or asked) but is the cockpit artwork available?
 
Back
Top Bottom