Data East Slap Shot

cape14

Member
Joined
Sep 12, 2015
Messages
43
Reaction score
2
Location
centerville, Massachusetts
I'm trying to restore a Data East Slap Shot redemption machine. Everything works except it was missing the 115v 7rpm motor that runs the plate that returns the balls to the playfield. I picked up a used motor on ebay. The motor is made by multi products co. The one I picked up is 115v but 6rpm but that will work except it runs in the opposite direction then what it needs to run in. I know with dc motors, switching the wires will reverse the direction. But this is 115v ac. Does anyone have any knowledge on how to reverse the direction of these motors? Thanks
 
That's what I thought but I don't see how to disassemble it. I'll post some pictures.
 

Attachments

  • B271D79C-CC0F-40F5-8845-BDE5DEADC240.jpeg
    B271D79C-CC0F-40F5-8845-BDE5DEADC240.jpeg
    2.8 MB · Views: 6
  • CAF69502-E6D0-4092-9D0A-17619E9B399E.jpeg
    CAF69502-E6D0-4092-9D0A-17619E9B399E.jpeg
    1.4 MB · Views: 6
  • EFD03931-75A7-4C1C-BF4F-05709B0CD9D0.jpeg
    EFD03931-75A7-4C1C-BF4F-05709B0CD9D0.jpeg
    1.9 MB · Views: 6
  • CEB55AEE-72D8-4108-B36F-9DADD798DAA7.jpeg
    CEB55AEE-72D8-4108-B36F-9DADD798DAA7.jpeg
    1.5 MB · Views: 5
I had to replace some bushings in my Bullseye motor. I had to drill through the brass "keepers" You can do the same to turn the motor around. I used redi-rod to re-assemble. You just have to make sure your alignment is true, or it will bind
 
Back
Top Bottom