Data east simpsons

Tuck

Active member

Donor 2012-2013
Joined
Feb 20, 2012
Messages
908
Reaction score
52
Location
Kamloops, B.C.
The pin connector from the power supply to the back glass lites was fryed so I replaced it and the lites worked for an hour and then when out and the connector was smokin hot cant rely find any shorts and the fuses are ok do I need to replace the power supply
 
No, most likely you need to replace the header pins on the power supply. The power supply itself is still probably fine. For a few bucks and a little work with a soldering iron you can have it going again.
 
Back
Top Bottom