Daphne Scoreboard help

Cackatron

Member
Joined
Jan 27, 2018
Messages
56
Reaction score
17
Location
Dieppe, NB, Canada
I followed the instructions for the cable pin out on the Daphne site, but when it starts it just shows 88 in Player 2. It usually goes away once the pc starts, but will stay if I un plug an dplug it back in. Has anyone experienced this before and know what to do next? Note I'm using a usb to parallel port cable on an i5. I attached a photo of what I'm seeing.
 

Attachments

  • IMG_7914_compressed.JPG
    IMG_7914_compressed.JPG
    412.9 KB · Views: 22
@HudsonArcade are you still selling the adapters? My initial plan was to use a raspberry pi. @swood I do have a DL with original hardware and a dexter since the player no longer works, I was going to do original but the CDN dollar is horrible at the moment. TBH it's the monitor that's the problem with the CGA adapter (major burn in from snow bros) I used an adpater before for Cliffhanger and it looked fine on a good monitor.
 
Back
Top Bottom