bruce092873
Member
Was wondering if I could get a little help on some issues I'm having with a Cyclone pin?
I've been looking through all the manuals and books to find what size pivot nuts I would need for the playfield hinges. My carriage bolt is 3/8 " I believe. Marco has a couple but as far as I can tell they are all the wrong size. If anyone has a cyclone and you can measure the outside diameter of the pivot nut please let me know.
Also, when I lower the Playfield back down and turn the game on, at the far left back end of the Playfield is the score for the comet ramp that increases by 20,000. I am seeing the glare from the lights shinning over the top of the scoring area. I ordered a new Playfield glass back trim thinking this may help but it didn't. I have one pivot nut on the left side that still won't raise it high enough. It seems like the whole playfield area has to be raised up about a half inch. I checked where the hinges are located on the Playfield and they're in the right spot also everything fits into place. All the metal latches when the playing field is let down line up correctly. If anything the back end has to be raised up to meet the glass trimand I don't know how I can get that to lift up. I have about a half inch to 3/4 of an inch space from the top of the Playfield the underneath part of the glass trim.
I've been looking through all the manuals and books to find what size pivot nuts I would need for the playfield hinges. My carriage bolt is 3/8 " I believe. Marco has a couple but as far as I can tell they are all the wrong size. If anyone has a cyclone and you can measure the outside diameter of the pivot nut please let me know.
Also, when I lower the Playfield back down and turn the game on, at the far left back end of the Playfield is the score for the comet ramp that increases by 20,000. I am seeing the glare from the lights shinning over the top of the scoring area. I ordered a new Playfield glass back trim thinking this may help but it didn't. I have one pivot nut on the left side that still won't raise it high enough. It seems like the whole playfield area has to be raised up about a half inch. I checked where the hinges are located on the Playfield and they're in the right spot also everything fits into place. All the metal latches when the playing field is let down line up correctly. If anything the back end has to be raised up to meet the glass trimand I don't know how I can get that to lift up. I have about a half inch to 3/4 of an inch space from the top of the Playfield the underneath part of the glass trim.
