Cyberball issue - Any Ideas

CptnSteve

Member
Joined
Jul 16, 2012
Messages
529
Reaction score
3
Location
Ft myers, Florida
So I recently picked up a Cyberball 4 player and when the guy showed it to me, it worked fine. I got it home and pluggedit in and now I only get garbage on the screens. Oddly enough if I remove the soundboard, the game plays fine. So I had a spare sound board, hooked it up and again, garbage graphics on the screen.

Any ideas what may be causing this? Not really sure what to check here. I'm starting with the power supply, but thus far the 5v power looks good.
 
What garage is on the screen

Its the rug like pattern it puts up when it goes into test mode but it freezes there instead of continuing. I think I found what the issue is though. It seems that I had a short in the coin door lights that was wreaking havoc on the power. I disconnected the light sockets and it seems to be ok for now.
 
Back
Top Bottom