Cut Konami Harness Issues

squall280

Active member
Joined
Mar 19, 2010
Messages
1,382
Reaction score
19
Location
Pennsylvania
so here is the issue
http://www.youtube.com/watch?v=8XQ4mHfYQY4

now the monitor was recapped and it didn;t change anything. so then during the trouble shooting of the monitor the chassis got a little more messed up when throwing in a jumper. beyond that i had another monitor i pulled that i know works great....connected the game and got the same graphical interference. so then i got another konami board and threw it in.....SAME interference.

i think it has to do with pulling the power and ground off the board. anyone familiar with the old konami hardness and how they cut and bypasses those two positions on the board. its the only thing that is making any sense to me.

the monitor i pulled works great so i know it has to be something with the harness. anyone help. all the konami board i got with the lot have wires soldered on the board that bypass power and ground that the had been looped into the harness wires.
 
looks like you might forgot to connect ground cable in the neck board. if it was intact, then check if ground connection from RGB connector is connected correctly.
 
they are in place. i think it has to do with the cut wiring harness. anyone have experiences with the cut harness?
 
Back
Top Bottom