Custom Vinyl Stickers

Fibonacci

New member
Joined
Feb 17, 2007
Messages
1,986
Reaction score
3
Location
Moscow, Idaho
Rating - 100%
8   0   0
There seemed to be some interest, so I will throw this out. I have a vinyl cutter for making adhesive art. Think the stuff you see on car windows and signs.

Here are a couple samples that I cut tonight. My limits are 36"x47" per piece. I can do most any color, but each piece is a single color. They can be stacked to make composites, as you can see on the car below, but they are a bit harder to apply that way.

I don't mind doing custom art, if you are interested in something else.

Shipping for small pieces that will fit in a padded envelope is about $3.00 for whatever will fit.

Space Invader:
si_1.jpg


4" wide, $3 each

Space Invader (Sideart):
si_2.jpg


6.5" wide, $5 each

Akuma Silhouette:
akuma.jpg


24" wide, $20 - This one is discounted from where something this size normally would be because he was a test cut for another project and has no legs.

Composite Example (flames):
IMG_2605.jpg


EDIT: Evidently there is an extra fee for shipping a rigid envelope. Given that the vinyl does not take well to being creased (it can be bent), shipping will be $2 in a padded envelope, or $3 in a padded envelope with cardboard protection.
 

Attachments

  • si_1.jpg
    si_1.jpg
    24.5 KB · Views: 16
  • si_2.jpg
    si_2.jpg
    17.2 KB · Views: 14
  • akuma.jpg
    akuma.jpg
    35.5 KB · Views: 15
Last edited:
I you would like an in game invader, please give me the number of the one that you want (shown below) and the color that you want.

I have black, white, red, green, blue, and yellow in stock, and I can get most other colors if desired.

The prices specified above are for that size and general complexity. If you want something a custom size, just let me know. Otherwise I will assume that you want the sizes listed above.

I can also add text to any part as well.

Finally, if you want something else, just let me know. I have made quite a few non-arcade related signs as well.
 

Attachments

  • Space_Invaders_numbered.JPG
    Space_Invaders_numbered.JPG
    17.6 KB · Views: 66
In response to several people asking, here is a pic of the colors of vinyl that I have on rolls (excluding black and white).

Also, a couple more invaders.
 

Attachments

  • IMG_2710.JPG
    IMG_2710.JPG
    31.8 KB · Views: 31
  • IMG_2711.JPG
    IMG_2711.JPG
    18.6 KB · Views: 19
Here is a png from my vectorized logo. Is this the logo you are thinking of?

How well it will cut will depend on how large it is. I am concerned about the fine line along the outline.

If you give me some rough dimensions, I can check it out.
 

Attachments

  • exidy.png
    exidy.png
    15.7 KB · Views: 24
Here is a png from my vectorized logo. Is this the logo you are thinking of?

How well it will cut will depend on how large it is. I am concerned about the fine line along the outline.

If you give me some rough dimensions, I can check it out.

I will get a size for ya tomorrow, i want it on the small wing back windows of my van :)
 
EDIT: I updated the art file and I can cut most any size now. New pic posted.
 

Attachments

  • exidy_fixed.JPG
    exidy_fixed.JPG
    34.9 KB · Views: 12
Last edited:
With the vinyl that I have, I can do up to 23.75" x 40.25" per piece. A figure can be rotated to fit that as well.
 
looks like about 24"w x 12"H would probably work so you think that is doable?
if so i would probably take 2

A normal space invader (arms up or down) that is 23.5" wide is 17.25" tall.

EDIT: I misunderstood what you were asking. The exidy logo can be cut that size no problem.
 
Last edited:
Can you make any design? What about a decepticon logo? You know from transformers. I have an old smart ticket eater and i want to make it into a mini but have a decepticon theme. I think it would be cool to have those logos as side art.
 
Can you make any design? What about a decepticon logo? You know from transformers. I have an old smart ticket eater and i want to make it into a mini but have a decepticon theme. I think it would be cool to have those logos as side art.

Yes, I can cut most anything. There are limits to the amount of detail that I can cut, but that is about it.
 
Back
Top Bottom