Custom control panels for MAME cabs?

Smart Bomb

Well-known member

Donor 2014, 2024
Joined
Apr 25, 2014
Messages
3,425
Reaction score
494
Location
Kenner, Louisiana
Im searching online and can't find exactly what I need. I need a control panel for the cab in the pic. Anyone have a link or two that may have what i need or they can build it based on the cab cp area?

Btw..this isn't for me..its for someone else.
 

Attachments

  • IMG_0446.jpg
    IMG_0446.jpg
    201.9 KB · Views: 30
  • 20170808_121429.jpg
    20170808_121429.jpg
    523.1 KB · Views: 24
  • 20170808_121511.jpg
    20170808_121511.jpg
    511.7 KB · Views: 19
  • 20170808_121442.jpg
    20170808_121442.jpg
    512 KB · Views: 19
Im searching online and can't find exactly what I need. I need a control panel for the cab in the pic. Anyone have a link or two that may have what i need or they can build it based on the cab cp area?

Btw..this isn't for me..its for someone else.

If i were you i would just make something out of wood for it. Make a front and top panel. Attach them using metal brackets and bend them at an angle to give your top panel a bit of an incline.

If you have a router with a roundover bit, round off the top panel. Then drill out your button and stick holes and just lay some generic cpo vinyl on your CP.
 
I'm just finishing up a scratch-built Jamma cab that I built mostly out of stuff that I had lying around. It's currently running the JammaParts multi-vector board. It looks quite similar to your cabinet (see attachment). For the control panel I used a Rubbermaid modular shelf that I drilled out. If it turns out to be not that durable then I'll just replace it with a piece of plywood. My goal was to minimize painting which usually takes more time than I want.
 

Attachments

  • 20170806_200039.jpg
    20170806_200039.jpg
    537.4 KB · Views: 20
Back
Top Bottom