Custom Arcade Vinyl Stickers - Any Interest?

Fibonacci

New member
Joined
Feb 17, 2007
Messages
1,986
Reaction score
3
Location
Moscow, Idaho
I recently got my vinyl cutter up and going and wondered if there was any interest in custom arcade stickers or something like that.

I have a couple pics of some pieces I made for a buddy's wall. The two are about the same height, and that is a dollar bill for scale.

My minimum width is about 1/16", and the max is 35"x65" per piece.

Not looking to sell anything in particular at the moment, just fishing to see if it looks worth pursuing.
 

Attachments

  • 2010-04-24 15.10.52.jpg
    2010-04-24 15.10.52.jpg
    88.5 KB · Views: 109
  • 2010-04-24 15.11.44.jpg
    2010-04-24 15.11.44.jpg
    87.9 KB · Views: 118
Can you print in color? Are you capable of putting it on magnetic material? I am considering designing a logo to put on the side of a panel van
 
I've got a ton of Nintendo stuff in this vein all over the cade, is there any way you could do monochrome but with a color other than black? I'd love to have something like the Temjin and Raiden sideart of a VO to put on a half and half wall in Virtual On pink and blue :O
 
It is not printing, it is actually cutting the adhesive vinyl.

Yes, I can put it on magnetic material, yes many colors are available.

I currently have red, green, blue, white, yellow, brown, and black on the roll. I have smaller pieces of grey, silver, a couple blues, and a couple more greens. I can get most any color though.

As far as pricing, those guys are about 48" tall by 24" wide and were $75 each.

I would probably charge about $5 for a 4"-6" piece or $10 for a 10" circle. That would depend on thew kind of vinyl (metallics and color changing ones cost more).

Most of the colors that I have a permanent adhesive, but they are available with removable adhesive as well. I will post up some pics of a couple other parts later.

PM if you have anything specific in mind.
 
Here are some pics of some other parts I cut. Sorry for the low quality pics, my wife is out of town with the good camera, but you get the idea.
 

Attachments

  • IMAG0105.jpg
    IMAG0105.jpg
    44.5 KB · Views: 18
  • IMAG0106.jpg
    IMAG0106.jpg
    38.3 KB · Views: 25
  • IMAG0107.jpg
    IMAG0107.jpg
    26.8 KB · Views: 24
How about an Asteroids and Space Invaders kits. I have a SI on my back window (about 4x4) and he needs to be replaced with some friends.
 
Ohh what a cool idea. Kinda like those stupid stick families but cool space invaders or asteroids.

I have been thinking about making myself a set of those, but they just seem like too much of an invitation to trouble for me.

I am working on a design for a game of pacman for a mirror to hang in my game room.
 
Can you cut stencils? Like the thin cardboard or plastic type?

I can cut adhesive stencil material on this machine, but not like the hard plastic ones you see at the store. This machine does not cut all the way through the material, only the top layer.

That said, I also have a CNC mill with a 4'x4' work surface. Depending on what you need, I might be able to make it on that. If you want to PM me the details, I would be happy to discuss it with you.

Jason
 
Back
Top Bottom