Crystal Castles Help!! Characters on screen are glitchy have lines

Gambeno

Member
Joined
Oct 2, 2010
Messages
439
Reaction score
1
Location
Rocky Mount, Virginia
Crystal Castles Help!! Characters on screen are glitchy have lines

Game works completely fine, but for some reason the characters on screen are glitchy with lines running through them. I thought it was the filter board, and I pulled that off but with no luck. (at first I thought it fixed it cause the lines were gone but the characters were still glitched). Everything checks out ok in the test menu so I'm baffled. If anyone has a Idea what it could be or were I could start looking I would really appreciate it.
Thanks,
Kane

PS. Picture below of what the Characters are displaying.
 

Attachments

  • IMAG0559.jpg
    IMAG0559.jpg
    98.3 KB · Views: 36
Game works completely fine, but for some reason the characters on screen are glitchy with lines running through them. I thought it was the filter board, and I pulled that off but with no luck. (at first I thought it fixed it cause the lines were gone but the characters were still glitched). Everything checks out ok in the test menu so I'm baffled. If anyone has a Idea what it could be or were I could start looking I would really appreciate it.
Thanks,
Kane

PS. Picture below of what the Characters are displaying.

Start by checking your voltages, and check to make sure the edge connector is clean.
 
Only Voltage that is off is the +10.3v is reading +11.9V and the harness and +15V at the Power Supply. I also clean the connectors with no luck...
 
More pics.... anyone knows a solution to the problem I would really appreciate it.
 

Attachments

  • IMAG0561.jpg
    IMAG0561.jpg
    103.4 KB · Views: 15
  • IMAG0562.jpg
    IMAG0562.jpg
    97.4 KB · Views: 22
Back
Top Bottom