crusin usa changing out coin box

digdug182

New member
Joined
Dec 23, 2010
Messages
5
Reaction score
0
Location
westlake, Ohio
I wanted to know how hard it is to change out the coin door on a crusin usa, if the change door is open the reason is someone cut the coin box all jagged metal and cant pull coin box out the front and I have another change box i want to use in its place from another crusin usa,So the question is can i change out from the front way or do i have to go threw the back which seems real hard any info would be very helpfull thanks
 
From the front

It's not hard but a pain in the but.

There are metal clips that hold the over / under door frame to the game. You need to loosen the bolts that hold these in place and slide the clips in and the whole assembly will pull out from the front. Just make sure you make a wire diagram or label the wires so you remember which goes where

Here is a link that shows an exploded view of a similar door (It's a happ door but they are similar in design).

http://www.happcontrols.com/coindoors/40003800_exploded.htm

EDIT: It's easier if you have an offset closed end wrench to get to the bolts.
 
Back
Top Bottom