Cruisin USA & validator problem

BobsterD

Member
Joined
Apr 20, 2009
Messages
276
Reaction score
2
Location
New Mexico
I have installed a VFM2 validator into my Cruisin USA and tried a number of setting but can't seem to get the game to recognize the credits from the bill. It has one coin drop and the validator. Currently the game is set to two coins for one credit, and the validator is set for 4 pulses per dollar. Fast/Slow pulse does not make a difference.

Any ideas?
 
do you have the NO and NC pins of the the validator connected to the wiring to the coin switch on the coin door?

I'm not sure if the Cruisin' had a validator already (or wiring for one) and you just hooked it up, but if you custom installed one, then it needs to send those pulses to the coin credit line for the board to recognize it...
 
Found it.... in the back of the game there was a plug with two wires, black and black/orange, that were to be connected to another plug behind the coin door. Why they were apart and in different areas of the cabinet I don't know, but it now works.

Thanks for the tip!
 
Back
Top Bottom