VertexGuy
Well-known member
After cleaning some of the sockets and chip legs the game started to run.
I started cleaning alittle more , game made coin up sound and kong would climb the ladder
and so forth. was able to put initials up.. grafx still looked a tad off... has a faint whine
in the background.
I think the board is gonna need new sockets and a z80. i also noticed a bunch of cold solder joints and a shadey ram chip.
It had that white mildew /residue on some of the legs of the daughter cards.
Has an adaptor for taito cabs included.
Marquee is cut slightly on both sides.
Bezel is cut where the bend for the part that goes up.so it would work like a pac man bezel.
$100 covers pp fee and shipping in the US.
please bare in mind that we are talkin about a bezel and marquee with the board.
so its a good size box.




I started cleaning alittle more , game made coin up sound and kong would climb the ladder
and so forth. was able to put initials up.. grafx still looked a tad off... has a faint whine
in the background.
I think the board is gonna need new sockets and a z80. i also noticed a bunch of cold solder joints and a shadey ram chip.
It had that white mildew /residue on some of the legs of the daughter cards.
Has an adaptor for taito cabs included.
Marquee is cut slightly on both sides.
Bezel is cut where the bend for the part that goes up.so it would work like a pac man bezel.
$100 covers pp fee and shipping in the US.
please bare in mind that we are talkin about a bezel and marquee with the board.
so its a good size box.




Last edited: