Crazy Gyruss...What happened here?

squall280

Active member
Joined
Mar 19, 2010
Messages
1,382
Reaction score
19
Location
Pennsylvania
So I picked up Gyruss today. Got home and opened up the back. Noticed that what i believe are the power and ground portion of the harness was cut of and the board was hardwired in. The game works but I thought this was weird. On the board it self you could see that where the power and ground would have been is burnt out. Why would this happen. Also the seller mentioned there was an issue with the vertical hold. Now i thought it was a simple adjustment on the back but it isn;t. Any help on the monitor or why its wired the way it is would be helpful. Should i just leave the board alone or replace the harness and get another board. I know the board works fine but I am just worried.

media1.jpg


 
Harness

A lot of Gyruss, Track & field have had this done some more profesionaly than others because of the power connections being under engineered. See if it has lost connection on the sync wire causing the scrolling.
 
i am stupid when it comes to monitors and some stuff on the boards. where is that wire located?
 
Last edited:
everything i did on the monitor did nothing. they said it was somethign with the vertical hold but couldn;t be adjusted by the pods.
 
Back
Top Bottom