Crazy Climber Deluxe issue.

Mikes2nd

New member
Joined
Dec 18, 2011
Messages
17
Reaction score
1
Location
Ohio
So I have a crazy climber deluxe

I was having a slight issue with the monitor on my crazy climber.

Its a EZ20 sanyo monitor, it was dropping the red a little.

So I took it out and was having it looked at and the monitor rolled over and it broke the end board.

I got another nintendo ez20 monitor. The game was just shopped, it worked great board wise.

So I had a nintendo monitor chassic checked out. the chassis checks out, I have 3 ez20 monitors. They all produce the same result. I have swapped the chassis to the 3 monitors, same result.

The game works, sounds plays etc, It was working fine, I get a solid screen(blue, green, red adjusting).

I always get the the same screen, no movement.

I tried another board, the sound did not work... but I got the same screen.

This is all with the inverter board. The non inverter shows a squiggle on a blue screen

The original ez20 sanyo does not have a sound board since crazy climber nich does not have a sound board on the monitor.
 
Last edited:
Okay maybe someone can help me read the CC Nichubitsu schematic.

I have the inverter board on the monitor.

I checked the manual, but I cant figure out how to match the

red, green, blue sync, ground to the monitor

http://www.arcade-museum.com/game_detail.php?game_id=7426

Manual is there, but I can't make out the schematic.

I think its (the original signal wire)
1. goes to 2
2. goes to 1
3. 3
4. 4
5. goes to 6
6. blank

I think 1 = R, 2 = G, 3 = B, 4 = Grd, 5 = sync on the CC nichubutsu board.

But all I know is the first 5 wires on the original and goes to the first 4 and 6th on the monitor(old sanyo). (I now have the wires out of the connector on the monitor side). so I have 5 wires on the game board connector 1 thru 5. Now I need to map them to the nintendo.


to the nintendo monitor(the ez20).

http://www.mikesarcade.com/arcade/monitors.html

the nintendo monitor is like
1. G
2. R
3. B
4. Grd
5. Grd
6. Sync

I am an idiot :) I am close I think.
 
Back
Top Bottom