CR7000 Repair

aesop

Member
Joined
Nov 9, 2007
Messages
472
Reaction score
14
Location
Gilbert, Arizona
Looking for someone that can repair a Sencore CR7000. In running through the testing procedures, it does not appear to be generating the voltage for the cutoff test.

The filament voltages are there, as are the bias voltages.

Following the testing procedures from this thread.


Thanks
 
I'm working through one now for my boss. It's not as daunting as I thought it was going to be once I opened it up, and I do have access to all of the documentation they ever released for it. I'm feeling pretty confident. If I get it fixed, I'd be open to at least taking a look and seeing if I couldn't get it going for you
 
That would be great. I think there were a couple of people looking for someone to help service the unit. Please keep us updated.
 
I've got ours fixed and fully field tested with no sporadic issues. I've got one more from a local operator I'm going to work on next. If I get 2/2, I'll be open to taking on others since no one else seems to.
 
Ok, I've fixed and field tested 3 of these now. I can't promise I can fix every single one, but I feel confident enough and have enough documentation that I'm not opposed to taking a look at them, especially since pretty much no one else will.

Obviously, I'll have to charge for my time and parts, I work on games full time for a living, but I've heard the only other person who will look at these charges $585 or something wild. I'm guessing Lance at Choice Electronics? But, I don't know. I can't see any of them getting to that and I wouldn't allow the time to rack up to that kind of amount.

PM me if anyone has one they'd like to send in and see if I could get it going.
 
Back
Top Bottom