Couple Monitor Questions....

noice87

Well-known member
Joined
Mar 25, 2002
Messages
12,238
Reaction score
115
Location
Glenn Heights, Texas
I just picked up a 13" Elechrome monitor (Will get the exact model number tomorrow). Will a G-07 cap kit work for it? The cap kit is new and still in the bag but at least 3 or 4 years old. I got the cap kit with a game I bought 3 years ago (Have sold the game sometime ago). Will it still be good? Could be other issues with the monitor as I got it untested and I have not tested it yet.

Thanks Steven
 
Find out which monitor model is that (uploading an image can help senior members to identify it for you) then download the manual and check which caps you need. You can also take note of what caps are just mounted in the chassis.

Ah: i would suggest you not to use that old kit: caps dry ageing

EDIT: just noticed you actually have more than 10000 post, so probably my answer will be of no use, sorry
 
Last edited:
I just picked up a 13" Elechrome monitor (Will get the exact model number tomorrow). Will a G-07 cap kit work for it? The cap kit is new and still in the bag but at least 3 or 4 years old. I got the cap kit with a game I bought 3 years ago (Have sold the game sometime ago). Will it still be good? Could be other issues with the monitor as I got it untested and I have not tested it yet.

Thanks Steven


If this is a 13" color raster monitor then it is most likely a G07-FBO. Your cap kit is most likely for the CBO and there are a few value that differ. There was a thread recently listing the differences, a search of the monitor forum should find it.


The cap kit is most likely still good, but remember if you put old caps in there then they will fail sooner.
 
Edward Lutz has has the FBO listing here somewhere.

Bear in mind that the flyback DOES have a different number than the 19". Usually people replace them with the 19" version and don't have a problem, but I did have an FBO that gave a really small pic with a CBO flyback, but the original worked fine...
 
Here you go...
Electrohome G07-FBO 13"

1uf50V C504
1uf50V C520 BP Cap
1uf160V C523
3.3uf160V C412
4.7uf50V C408
4.7uf63V C407
10uf50V C301
10uf50V C303 Positive lead towards PCB edge
10uf250V C107/C905
33uf16V C506
47uf16V C518
47uf160V C511
100uf6.3V C701
100uf160V C411
220uf16V C302/C403/C517
600uf200V C904 B+ Filter Cap
2200uf25V C521

R908 = 47K 1/2W
R317/R314 = 390 ohm 1/4W (orange/white/brown)

Edward
 
Back
Top Bottom