Could someone take a look at your Space fury Speech Board wires for me.

Dave27

Active member
Joined
Aug 17, 2006
Messages
2,303
Reaction score
1
Location
Snohomish, Washington
Could someone take a look at your Space fury Speech Board wires for me.

I would just like to verify how your 2 wires are hooked up. The Speech pcb is marked from top to bottom 6,5,4,3,2,1 can you tell me where your two wires are connected.I have mine on 5 and 3....Thanks much....Dave
 
Actually no yours is exactly right and mine is wrong.Pin 1 is on the bottom of that sound board which is where that yellow wire is going to in the upper L/H corner.I would like to see a picture though of someones machine to be sure. Has to be someone who could snap even a crappy cell phone picture for me :) ....Thanks....Dave
 
It works I just said lets go smoke it or it works and I went with Mjenison's pinout he sent me and now it plays 100%. Just a note to everyone that is the correct pinout I researched it on the internet today and found 3 different pinouts. Thanks MJenison its a blast to finally play it the way it should be.
 
Back
Top Bottom