Converting VS system Back to DK

thefader

New member
Joined
Jun 21, 2010
Messages
953
Reaction score
1
Location
South Dakota
All of my DK cabs have been converted to VS Systems. I want to convert them all back. I only really understand JAMMA wiring, so what changes were made to the wires when switched to VS? And will someone explain to me what changes I need to make to wire it back? I cant find much information about what color wires are what, and where they go. Thanks.
 
so what changes were made to the wires when switched to VS
The harness was changed out completely. You won't be able to use the vs harness at all. So wire color really won't matter. Get yourself a DK board and wire harness and put it in. As well as a control panel, and some brackets to mount the monitor vertical. Then all you need to do is play it, and put some artwork on it. The power supply will be the same, as well as the audio cable and video cable.

Hard part will be finding the harness and cheap board.
 
All of my DK cabs have been converted to VS Systems. I want to convert them all back. I only really understand JAMMA wiring, so what changes were made to the wires when switched to VS? And will someone explain to me what changes I need to make to wire it back? I cant find much information about what color wires are what, and where they go. Thanks.

The entire wiring harness was changed... easiest solution is to buy an adapter to convert the wiring... depending on what's in the game, you may need to swap power supplies to get -5V for the DK.
 
I think its still the same power supply.... Where the Power supplies swapped out to turn DK into VS?
 
Back
Top Bottom