Convert Ms Pac Man clone roms to Original Pac-Man

Dreg604

Member
Joined
Jun 21, 2013
Messages
59
Reaction score
0
Location
Qc, Canada
Hi there,

unusual quesiton here. I have a clone Ms Pac Man 2 pcb that I wish to convert to original Pac-man eproms. Is this feasible or pure heresy ;)

I noticed that the original pac man roms have 10 eprom to burn but the ms puckman pcb has only 8 eproms including a daughter board. My guess is that I would require to had new Ic sockets... right?

Thanks
 

Attachments

  • mspcukman2.jpg
    mspcukman2.jpg
    197.7 KB · Views: 35
See if it will run as PacMan if you take that daughter card off and put the Z80 from that card directly into the socket on the board. If it runs as PacMan but the graphics are slightly messed up then all you need to do is change those two ROMs on the 2nd board to PacMan 5e and 5f.
 
hmm.. Looks like the Z80 on the daughter card is soldered in place. You will need to un solder it or find another one
 
Back
Top Bottom