FS Parts: Consolidated Parts Sales - Pictures By Request.

Thomas

Well-known member

Donor 2021
Joined
Jan 23, 2009
Messages
3,726
Reaction score
75
Location
Virginia
Rating - 100%
61   0   0
All shipping is with signature confirmation, insurance & pp fees included. Never Pay as a gift!

$65.00 - Missile Command Marquee - Complete with brackets - Very Nice - US Shipping $20.00
$35.00ea - 2 Sets Pole Position 1 Boards - Untested - US Shipping $20.00
$75.00 - Robotron Control Panel - US Shipping $20.00
$1.50ea - Plastic Cyl Style Locks All Keyed The Same w/Cams 43 Total - Shipping Depends On Qty
$80.00 - WG 19k4915 Chassis w/ Yoke - Med Res - Untested - US Shipping $20.00
$80.00 - WG 19k4915 Chassis w/ Yoke - Med Res - Untested - US Shipping $20.00
$00.00 - Roy Clark Misc Pinball Parts by Allied Leisure - Inquire Within
$25.00ea - 2 Pole Positions Bricks - US Shipping $25.00
$15.00ea - 3 AR3's For Champsprint or Paperboy - US Shipping $17.00 - Might Fit Small Flat Rate???
$6.00ea - 9 Misc AR2's - All Need Rebuilt - US Shipping To Be Determined
$20.00 - Lot Of Used Buttons - Should Fill Med Flate Rate Box With Ease - US Shipping $17.00
$10.00 - 6 Neck Boards 4 CR31, 1 CR23 & One 12pin - US Shipping $17.00
$111.00 - Lunar Lander Main Harness - Serial #Not Sure Yet - Almost ready to ship - Free US Shipping
$30.00 - Lunar Lander Cp Harness - Serial #11 - US Shipping $9.35
$15.00 - New Robotron Control Panel Harness - US Shipping $9.35
$27.50 - New Williams AC Repro Harness Switcher Mod - Serial #001 - US Shipping $9.35
$9.00ea - New jamma Harness's x5 - Cheapo - US Shipping $9.35 Can Fit 2 Per Box
$45.00 - Jr Pac Board - Tested Working - US Shipping $20.00
$75.00 - Stargate Board Set - CPU - Rom - Sound - Non Working - US Shipping $25.00
$75.00 - Defender Board Set - CPU - Rom - Sound - Non Working - US Shipping $25.00
$50.00 - Defender Wire Harness - US Shipping $20.00
$25.00ea - Misc Williams Bricks 3 or 4 Total - US Shipping $25.00
$25.00set - Williams Metal Plates - US Shipping $25.00
$15.00 - Pole Position Interconnect Board - US Shipping $9.35
$50.00 - 13 Monitor With Built In ISO - 1 Small Spot Dead Middle - Local Pickup Only
$15.00 - Ms. Pac-Man Cpo - Tb Repro - US Shipping $17.00
$15.00 - 25' Polo Monitor - Remote Board - US Shipping $9.35 - Sold
$10.00ea - Old 19 Inch TV's - CR23 & CR31's - Local Pickup Only
$10.00ea - 19 Monitor Frames With Burnt Tubes & Yokes - Local Pickup Only
$80.00 - New Monitor Shelf Chrome With Wheels - Sold After Monitors Gone - Local Pickup Only
$100.00 - 1944 US Air - Air Compressor - Working - Local Pickup Only
$65.00 - Craftsmen Air Compressor Working - Local Pickup Only
$35.00ea - 3 Sets Championship Sprint Boards - Untested - US Shipping $20.00
$15.00ea - 2 Sets Championship Sprint Pedels - US Shipping $20.00
$15.00ea - 2 Sets Pole Position Pedels - US Shipping $20.00
$35.00 - Pole Position Mitsu Chassis 202? - Fried Something One Night - US Shipping $20.00
$75.00 - NBA Jam Control Panel - With Three Good Joys - Shipping to Be Determined - On Hold
$250.00 Jungle Hunt Machine - Works but resets mid game - Local Pickup Only
...
 
Last edited:
Yep... Pm on the way! Are the forums slow tonight? I keep getting random outages here.
 
$15.00 - 25' Polo Monitor - Remote Board - US Shipping $9.35 - Sold
 
$75.00 - NBA Jam Control Panel - With Three Good Joys - Shipping to Be Determined - On Hold For Pictures Sat.
 
More Stuff added...

$20.00 - Ea. x2 Defender Cpu Boards - Non Working - US Shipping $20.00
$25.00 - Ea. x2 Mega Touch 4's Machines Or Parts - Flakey - Local Pick Up Only - Maryland 20678
$15.00 - Arkanoid Board - Working When Pulled - US Shipping $13.45
$10.00 - Slick Shot CPU - Tested Working - US Shipping $20.00
$25.00 - MK1 CPU - Tested Working - US Shipping $20.00
$15.00 - MK1 Sound - Untested - US Shipping $17.00
$5.00 - Omega Race - CP Spinner w/Two Latches - Potentiometer Broken - US Shipping $9.35
$20.00 - Ms. Pac-Man Control Panel - Needs New Overlay - No Joystick - US Shipping $20.00
...
 
Last edited:
$6.00ea - 9 Misc AR2's - All Need Rebuilt - US Shipping To Be Determined - On Hold For Pictures On Saturday Nite
 
Ok Ben... The shots
 

Attachments

  • DSCN0335.jpg
    DSCN0335.jpg
    98.5 KB · Views: 6
  • DSCN0333.jpg
    DSCN0333.jpg
    95.7 KB · Views: 5
  • DSCN0337.jpg
    DSCN0337.jpg
    99.2 KB · Views: 5
  • DSCN0334.jpg
    DSCN0334.jpg
    94.6 KB · Views: 5
  • DSCN0336.jpg
    DSCN0336.jpg
    98.4 KB · Views: 5
A few more ....
 

Attachments

  • DSCN0338.jpg
    DSCN0338.jpg
    99.4 KB · Views: 3
  • DSCN0339.jpg
    DSCN0339.jpg
    79.1 KB · Views: 3
  • DSCN0340.jpg
    DSCN0340.jpg
    86 KB · Views: 3
  • DSCN0341.jpg
    DSCN0341.jpg
    90.8 KB · Views: 5
  • DSCN0342.jpg
    DSCN0342.jpg
    88.9 KB · Views: 5
I can bubble wrap the boards twice around. Then shrink wrap the manuals to the boards. Should make for a nice tight package in one of the game board boxes.

Or

I can do the same in a custom box and that might save you some money...

lmk
 

Attachments

  • DSCN0343.jpg
    DSCN0343.jpg
    91.8 KB · Views: 3
  • DSCN0344.jpg
    DSCN0344.jpg
    94.7 KB · Views: 3
  • DSCN0345.jpg
    DSCN0345.jpg
    87 KB · Views: 3
  • DSCN0346.jpg
    DSCN0346.jpg
    89 KB · Views: 4
Posting pictures of all the AR boards. I have decided not to bust them up. At 6 bucks each the set 9 is cheap enough.
 

Attachments

  • DSCN0317.jpg
    DSCN0317.jpg
    99.2 KB · Views: 7
  • DSCN0319.jpg
    DSCN0319.jpg
    98.1 KB · Views: 7
  • DSCN0321.jpg
    DSCN0321.jpg
    95.4 KB · Views: 6
  • DSCN0322.jpg
    DSCN0322.jpg
    97.6 KB · Views: 4
  • DSCN0323.jpg
    DSCN0323.jpg
    97.7 KB · Views: 4
There are some pretty good ones in there... They all need rebuilt.
 

Attachments

  • DSCN0326.jpg
    DSCN0326.jpg
    97.8 KB · Views: 7
  • DSCN0327.jpg
    DSCN0327.jpg
    97.3 KB · Views: 6
  • DSCN0328.jpg
    DSCN0328.jpg
    97.6 KB · Views: 6
  • DSCN0330.jpg
    DSCN0330.jpg
    98.2 KB · Views: 4
All shipping is with signature confirmation, insurance & pp fees included. Never Pay as a gift!
$75.00 - Robotron Control Panel - US Shipping $20.00

Any chance for pictures or futher description on this one? Complete with wiring? How bad are the cig burns?
 
$15.00 - New Robotron Control Panel Harness - US Shipping $9.35

You can see in the upper left hand corner where someone started to strip the panel. The problem being they didn't heat it up a bit and took 1 layer of plywood off. Its about 5 inches long and maybe 2 inches down.

Easy fix once you get the cpo off. Everything will sand down real nice before you would need to skim coat it a bit with bondo for a minty fresh finish. Then a lil paint before a new cpo can be laid down.
 

Attachments

  • 1.jpg
    1.jpg
    93.7 KB · Views: 12
  • 2.jpg
    2.jpg
    94.4 KB · Views: 13
  • 3.jpg
    3.jpg
    93.9 KB · Views: 10
  • 4.jpg
    4.jpg
    92.3 KB · Views: 9
  • 5.jpg
    5.jpg
    95 KB · Views: 7
$6.00ea - 9 Misc AR2's - All Need Rebuilt - Sold

To the guy that wanted the stargate boards. The price stated is for non working boards. They worked when pulled and hung on my wall. I certainly can't sell you a working set for the amount posted in this thread. A working set is double my price thru multiple guys here on KLOV.

Sorry
 
As requested...
 

Attachments

  • DSCN0348.jpg
    DSCN0348.jpg
    93.8 KB · Views: 2
  • DSCN0349.jpg
    DSCN0349.jpg
    94.6 KB · Views: 2
  • DSCN0350.jpg
    DSCN0350.jpg
    94.3 KB · Views: 2
  • DSCN0351.jpg
    DSCN0351.jpg
    92.1 KB · Views: 1
  • DSCN0352.jpg
    DSCN0352.jpg
    93.2 KB · Views: 3
If you need any more just pm me...

Thanks
Billy
 

Attachments

  • DSCN0353.jpg
    DSCN0353.jpg
    96.9 KB · Views: 1
  • DSCN0354.jpg
    DSCN0354.jpg
    93.9 KB · Views: 1
  • DSCN0355.jpg
    DSCN0355.jpg
    97.8 KB · Views: 1
Back
Top Bottom