Connecting JROK MW to G07 (sync)

Sinistar

Member

Donor 2021, 2023
Joined
Mar 10, 2010
Messages
397
Reaction score
24
Location
Las Vegas, Nevada
Oh man this is driving me crazy, puhleeese somebody who's done this give me the down-low.

So JrokMW has Jamma w RGBGround and Vid Sync. Then there's the H sync and V sync coming out of the board as well. I have tried what seem like every combo to get sync out of this and know I must be doing something wrong.

Do they all go in the 3-plug above the rgb? Does one go in with the rgb and the others go above? Do I need to bother with the H and V sync on the board at all, do I just use the com sync from the jamma? Any point in the right direction on this greatly appreciated.

Thanks guys.
 
You'll do one or the other...

If you go exclusively JAMMA you will need to connect the SYNC from the JAMMA harness to each of the -HS (pin 3) and -VS (pin 2) pins (connect them together) on that 3 pin header of the G07.

If you choose to use the 2 pin header on the JROK board that puts out +HS and +VS you will connect each of them to their respective header pins +HS (pin 6) and +VS (pin 5) on the 6 pin header of the G07.

In both cases R, G, B and GND need to be connected.
 
Thanks buddy!

Got a chance to get back to it this weekend, and that helped a bunch.

It actually helped me realize I have some bad SC's in my Vhold circuit, but that's exactly what i needed to know! :)
 
Back
Top Bottom