Condor Power Supply capacitors

Hex92

Active member
Joined
Jan 23, 2015
Messages
209
Reaction score
41
Location
Virginia
I have 2 Condor power supplies. CP 573 and a CP 601. There is good info on the 573, but I can't find any for the 601. I want to replace the three large capacitors. Does anyone have a schematic for this power supply or know what the replacement parts would be?
 

Attachments

  • capacitor.jpg
    capacitor.jpg
    80.1 KB · Views: 22
  • Star Castle PS.jpg
    Star Castle PS.jpg
    140.9 KB · Views: 31
looks like a 10,000 uf 35volt on that one, you will have to read what the other two say

rarely do those go out of specification
sometimes supposed new ones are more out of spec than the old ones

why do you want to replace them ?
your ESR meter shows them as bad ?
 
I just figured I should replace them since they were old. I thought you were always supposed to replace old caps. They look good so If I don't need to replace them I don't want to make extra work for myself.

I don't have an ESR meter.
 
i should have all the caps in stock. there are a ton of different condor power supplies and that 573 with the axial caps i think you will find the caps are all run in parallel to increase the capacitance of that circuit and don't require all five but require the total capacitance of the 5. shoot me a pm if you need the caps for either.
 
Back
Top Bottom