I got my Commodore 1084s hooked up to my jamma test rig harness.
The jamma harness has composite sync. The Commodore 1084s has
split sync it seems.
I hooked the 1084S up to the analog 6 pin din on the back.
Using this pinout..
http://www.hardwarebook.info/Commodore_1084/1084S_(Analog)
6 PIN DIN FEMALE at the Monitor.
Pin Name Description
1 G Green
2 HSYNC Horizontal Sync
3 GND Ground
4 R Red
5 B Blue
6 VSYNC Vertical Sync
I cant get the monitor to Sync.. I tried sending the composite sync signal
to the Hsync, Vsync, and feeding it to both..
Any ideas?
The jamma harness has composite sync. The Commodore 1084s has
split sync it seems.
I hooked the 1084S up to the analog 6 pin din on the back.
Using this pinout..
http://www.hardwarebook.info/Commodore_1084/1084S_(Analog)
6 PIN DIN FEMALE at the Monitor.
Pin Name Description
1 G Green
2 HSYNC Horizontal Sync
3 GND Ground
4 R Red
5 B Blue
6 VSYNC Vertical Sync
I cant get the monitor to Sync.. I tried sending the composite sync signal
to the Hsync, Vsync, and feeding it to both..
Any ideas?
