Commando PCB Question

madmanmic

In Memoriam
Joined
May 7, 2007
Messages
1,024
Reaction score
1
Location
Rockwood, Michigan
I just purchased a Commando PCB. It has, what appears to be, a JAMMA to Capcom Pin-out adapter. Is this needed if it is going into a cabinet with a JAMMA Harness?

Thanks!
 
Actually, the edge connector on the PCB looks JAMMA and the adapter converts it to Capcom Pin (see pic)
 

Attachments

  • commandopcb1.JPG
    commandopcb1.JPG
    52.8 KB · Views: 16
Hang on, I'm guessing that the Capcom 56 PIN needs an adapter to JAMMA....(another pic)
 

Attachments

  • commandoapt.jpg
    commandoapt.jpg
    18.7 KB · Views: 9
Back
Top Bottom