Coin Mech Insert Artwork

Tighe

Well-known member
Joined
May 25, 2009
Messages
20,797
Reaction score
825
Location
Richmondville, New York
Anyone got a PDF I can print and cut to fill some of my coin slots that are empty? It looks like hell with just red plastic.

DSCN4227.JPG


Anyone got some really cool artwork? Or does everyone just put black with 25¢ on it?
 
You could get creative and do something that goes with the game. Gregatron made some cool mario/ Luigi ones for his MB WB.
 
Inspired

Gregatron's Mario Bros inserts were so awesome I had to make my own.

These are on my CPS2 cabinet:

DSCN4228.JPG


Of course now I see that my coin door looks like crap. :D Didn't really notice it before!

It was really easy, I just used a threshold adjustment to get a nice black and white image from the artwork from Turbo HD Remix.

Here are the images I made, just print them 0.625 x 1.170 inches. I think that Ryu came out better, but they both look fine when printed.

reject_ryu.png


reject_ken.png
 
Gregatron's Mario Bros inserts were so awesome I had to make my own.

These are on my CPS2 cabinet:

DSCN4228.JPG


Of course now I see that my coin door looks like crap. :D Didn't really notice it before!

It was really easy, I just used a threshold adjustment to get a nice black and white image from the artwork from Turbo HD Remix.

Here are the images I made, just print them 0.625 x 1.170 inches. I think that Ryu came out better, but they both look fine when printed.

reject_ryu.png


reject_ken.png

Hell yeah these are pure win!
 
IMO the fighters won't look as nice as the logo. Too much detail is lost for the full size fighter compared to a nickel sized MK logo.
 
Made the MK ones and some more

So I made some more, I only installed the MK ones. I have two different versions, I think that the Scorpion one is funnier, while the logo looks better overall. What do you guys think? I also made one for my propcycle, but I can't install until I get new plastic, my coin rejects are missing the faceplates. anyone know a good source? Also I need the plastic lightbulb sockets, I can't find them anywhere.

Here it is installed. I really need new plastic!
mk_reject.jpg


mk_reject_scorpion.png
mk_reject_skeleton.png


Logo Version:
mk_reject_logo.png


Propcycle:
pc_reject.png
 
Back
Top Bottom